Hasil Scrape Artikel 1.550.696 Paper

ID ↑ ID URL Judul Penulis Deskripsi / Abstrak Subjek / Kata Kunci Tanggal Link Identifier
1672561 #5790 FACIES AND PETROGRAPHIC CHARACTERISTICS OF CILETUH FORMATION IN THE MANDRAJAYA AREA, CIEMAS SUBDISTRICT, WEST JAVA Sayaf, Ival Umar
Isnaniawardhani, Vijaya
Hardiyono, Adi
Natasia, Nanda
The Eocene Ciletuh Formation, exposed within the Ciletuh-Palabuhanratu UNESCO Global Geopark, provides a key record of syn-tectonic sedimentation in West Java. While its general submarine fan setting is known, detailed facies and petrographic studies in specific localities are limited. This study aims to characterize the sedimentology of the Ciletuh Formation sandstone in the Mandrajaya area through an integrated analysis of lithofacies, petrography, and their spatial distribution to reconstruct its depositional environment. The methodology involved geological mapping to document outcrop characteristics and collect samples, followed by petrographic analysis of sandstones and conglomerates. Four primary lithofacies were identified: (a) matrix-supported polymictic conglomerate, (b) graded sandstone, (c) parallel-laminated sandstone, and (d) massive sandstone. Petrographic analysis reveals that the sandstones are texturally immature Lithic Arenites, and the conglomerates contain polymictic clasts of gabbro and recycled sandstone within a similar lithic arenite matrix. The spatial distribution of these facies delineates a submarine fan architecture, characterized by channel-fill deposits (conglomerates and massive sandstones) flanked by associated levee and overbank deposits (graded and laminated sandstones). The lithofacies association and petrographic composition confirm deposition within a dynamic submarine fan system sourced from a "Recycled Orogenic" belt, specifically the uplifted Ciletuh mé‎lange complex, within a tectonically active Paleogene fore-arc basin.Keywords: Submarine Fan, Lithic Arenite, Conglomerate, Fore-arc Basin, Sedimentation, Turbidite, Eocene.
2025-08-07 oai:ojs.jurnal.unpad.ic.id:article/65345 buka_link ↗ Highlight_link 10.24198/bsc.v23i2.65345
1672562 #5790 DISTRIBUSI VERTIKAL OSTRACODA DAN HUBUNGANNYA DENGAN PERUBAHAN LINGKUNGAN DI PERAIRAN TELUK JAKARTA -, Lili Fauzielly
A vertical distributions from quantitative analysis of ostracods and Total Organic carbon (TOC) was recorded from short sediment core from inner part of Jakarta Bay. A total of 56 ostracod species were obtained from 9 core samples. The dominant species were Keijella carriei and Loxoconcha wrighti, which are common in areas with high TOC and TN contents. According to analysis of ostracod assemblages and CNS analysis, the site began to be influenced by organic contamination from around 1950. Although the population of Jakarta City has increased rapidly since then, TOC and TN contents which were low, have gradually increased (0.58%–0.9%). The increased sedimentation rate after 1950 resulted in an increasing TOC ratio.
Ostracoda, TOC, CNS analysis, Jakarta Bay 2013-08-07 oai:ojs.jurnal.unpad.ic.id:article/8292 buka_link ↗ Highlight_link 10.24198/bsc.v11i2.8292
1672563 #5790 VULKANISME DAN KARBONAT UMUR MIOSEN DI DAERAH BANJAR-PANGANDARAN, JAWA BARAT Haryanto, Iyan
Ilmi, Nisa Nurul
Adhiperdana, Billy G.
Fauziely, Lili
Sunardi, Edy
Daerah Banjar-Pangandaran merupakan bagian dari Zona Pegunungan Selatan yang sebagian besar disusun batuan volkaniklastik Formasi Jampang. Batuannya didominasi oleh breksi, tuf dan batupasir kasar. Seluruhnya membentuk morfologi perbukitan sedang hingga terjal, dengan punggungan berarah barat-timur. Di bagian tepi dari lereng perbukitannya, tersingkap batugamping yang berumur lebih muda, yaitu Formasi Klapangunggal dan Formasi Pamutuan. Di lapangan tidak ditemukan kontak litologi, namun berdasarkan pada umur batuan yang menerus, serta kedudukannya di lapangan diduga keduanya memiliki hubungan stratigrafi yang selaras. Penelitian ini masih dalam tahap awal yang dilakukan hanya berdasarkan pada data singkapan. Analisis dilakukan dengan melakukan rekontruksi pola struktur (pola jurus), serta dipandu dengan interpretasi geologi melalui DEM.Hasil sementara menunjukan bahwa pertumbuhan carbonate mulai berlangsung ketika aktivitas volkanisma pawa waktu Miosen Bawah Berakhir. Pada saat itu di antara tinggian volkanik, memiliki lingkungan marin yang tenang dan dangkal, sehingga memungkinkan terbentuknya pertumbuhan carbonate. Di lihat dari peyebarannya, carbonate disimpulkan sebagai barrier kecil dan lainnya sebagai pitch reef.
2018-09-03 oai:ojs.jurnal.unpad.ic.id:article/17293 buka_link ↗ Highlight_link 10.24198/bsc.v16i2.17293
1672564 #5790 QUARTZ VEIN INFILL STRUCTURE MODE IN KENCANA DEPOSIT, GOSOWONG GOLDFIELD, INDONESIA Electricia, K.S.
Rosana, Mega F.
Yuningsih, Euis Tintin
Syafri, Ildrem
Viqnoriva, S.N.
ABSTRACTGosowong province has economic mineralisation which is classified as low sulphidation epithermal veining system containing high-grade of gold and silver. It is characterizes by various veins hosted in Holocene Quaternary volcanic rocks, mineralisation generally occurs in host rock andesite. The Kencana epithermal vein system in Gosowong Au-Ag district hosted by two main sub-parallel North-West trending major fault structures, named Kencana One (K1) and Kencana Two (K2) with strike lenght extend up to 600m. Both structures joined by link structures, appears to be Kencana Link (K-Link) as the thickest link structure. The Kencana One (K1) is the first underground mine in Gosowong district. The nature of underground conditions at Kencana has a high variability of gold grades. Thus due to extremely high grades ore in Kencana, it is need to be precise and thoroughly handling to obtain best results. Primary mineralisation occurs in multistage veins, breccias and stockwork veins as infill structures. This study confirming that there is a strong correlation between quartz vein infill structure mode versus gold grade which classified into (1) 1.01-3.0g/t Au, dominated with wall-rock breccia and stockwork, (2) 3.01-6.0g/t Au, dominated with wall-rock breccia follows by stockwork, (3) 6.01-20.0g/t Au, dominated with wall-rock breccia follows by quartz lode and stockwork, (4) 20.01-80.0g/t Au, dominated by wall-rock breccia follows by vein breccia and quartz lode, (5) >80g/t Au, dominated by wall-rock breccia. In terms of production quartz vein infill mode together and quartz vein texture with gold grade has been used as the main reference for geologist to make a direction in the process of ore drive determination in underground mining operations. Keywords: Kencana, low sulphidation epithermal, quartz vein infill modeSARIGosowong memiliki mineralisasi ekonomis yang merupakan epitermal sulfida rendah yang mengandung emas dan perak dengan kadar tinggi. Cebakan dicirikan dengan kehadiran urat yang bervariasi dengan batuan vulkanik kuarter sebagai batuan induk berumur Holosen, mineralisasi umumnya terjadi di dalam batuan induk andesit. Kencana berada di dalam area Cebakan Au-Ag Gosowong. Kencana terdiri dari dua struktur besar yang berdampingan, dinamakan Kencana Satu (K1) dan Kencana Dua (K2) dengan arah jurus sepanjang 600m. Keduanya dihubungkan dengan struktur yang dinamakan Kencana Link (K-Link) yang merupakan struktur bukaan yang paling tebal. K1 adalah tambang bawah tanah pertama di Gosowong. Kondisi bawah tanah di Kencana menunjukkan variasi tubuh bijih emas yang mengandung kadar emas yang bervariasi. Dengan adanya kadar emas yang tinggi, maka penangannya harus tepat dan seksama untuk mendapatkan hasil terbaik. Secara umum mineralisasi terjadi secara bertahap dalam urat kuarsa, breksiasi, dan urat stockwork. Penelitian ini menegaskan bahwa terdapat korelasi yang kuat antara tipe struktur urat kuarsa dengan kadar emas yang diklasifikasikan menjadi (1) 1.01-3.0 g/t Au, didominasi oleh breksiasi batuan dinding dan stockwork, (2) 3.01-6.0 g/t Au, didominasi oleh breksiasi batuan dinding diikuti oleh stockwork, (3) 6.01-20.0 g/t Au, didominasi oleh breksiasi batuan dinding diikuti oleh quartz lode dan stockwork (4) 20.01-80.0 g/t Au, didominasi oleh breksiasi batuan dinding diikuti oleh breksiasi urat kuarsa dan quartz lode (5) > 80g/t Au, didominasi oleh breksiasi batuan dinding. Di dalam proses produksi, tipe struktur urat kuarsa dan  tekstur urat kuarsa bersama dengan kadar emas menjadi petunjuk untuk geolog dalam menentukan arah penambangan emas di dalam tambang bawah tanah.Kata kunci: epitermal sulfida rendah, Kencana, tipe struktur urat kuarsa
2017-04-10 oai:ojs.jurnal.unpad.ic.id:article/11743 buka_link ↗ Highlight_link
1672565 #5790 KARAKTERISTIK GRANITOID DAERAH NYUKANG HARJO, KABUPATEN LAMPUNG TENGAH, LAMPUNG Brilian, Muhammad Alqori
Dyah Hastuti, Endang Wiwik
Daerah Nyukang Harjo Kabupaten Lampung Tengah Provinsi Lampung tersingkap batuan beku granitoid pada kondisi morfologi perbukitan rendah hingga perbukitan tinggi. Batuan beku pada daerah penelitian tersebar dengan cukup luas dan mempunyai karakteristik yang menarik baik secara megaskopis maupun secara petrografi. Penelitian ini bertujuan untuk mengetahui karakteristik, komposisi, dan tipe batuan beku daerah penelitian. Metode yang digunakan dalam penelitian ini meliputi observasi lapangan dan analisis petrografi menggunakan sampel batuan yang telah diambil dari lokasi penelitian. Observasi lapangan mengidentifikasikan batuan granitoid pada daerah penelitian berupa syenite. Hal tersebut diinterpretasi berdasarkan komposisi mineral yang hadir pada batuan, dimana batuan syenite memiliki ciri warna segar putih krem dengan warna lapuk putih kecoklatan, hal tersebut dipengaruhi oleh komposisi penyusun syenite didominasi alkali-feldspar. Hasil analisis petrografi didapatkan penamaan batuan berupa quartz syenite dan quartz monzonite dimana kedua batuan ini merupakan kelompok batuan beku plutonik yang bersifat asam hingga intermediet. Mineral penyusun quartz syenite didominasi oleh alkali feldspar serta terdapat mineral plagioklas (An30-An34), dan sedikit kuarsa, biotit, muskovit serta mineral sekunder seperti klorit, serisit, dan opak dengan tekstur khusus berupa perhite dan graphic. Sedangkan quartz monzonite didominasi oleh mineral alkali-feldspar dan plagioklas (An38) serta sedikit kuarsa, mineral penyusun lainnya berupa, biotit, dan serisit dengan tekstur khusus berupa perhite dan myrmekite.
2022-05-09 oai:ojs.jurnal.unpad.ic.id:article/39046 buka_link ↗ Highlight_link 10.24198/bsc.v20i1.39046
1672566 #5790 IDENTIFIKASI DAMPAK POTENSIAL PEMBANGUNAN TERMINAL TRANSIT DI BAU-BAU, PROPINSI SULAWESI TENGGARA -, Achmad Sjafrudin
Fuel needs that keeps on increasing in Makasar can not be fullfilled by the Makasar installation, therefore it is necessary to built Bau-Bau Transit Terminal in Southeast Sulawesi Province.The construction will raise effects towards environment. Hence the needs of EIA study is very crucial to minimize all the effects that will appear in the future to support sustainable development.
effect, enviromnent, EIA study 2008-08-03 oai:ojs.jurnal.unpad.ic.id:article/8156 buka_link ↗ Highlight_link 10.24198/bsc.v6i1.8156
1672567 #5790 ASAL SEDIMEN BATUPASIR FORMASI JATILUHUR DAN FORMASI CANTAYAN DAERAH TANJUNGSARI DAN SEKITARNYA, KECAMATAN CARIU, KABUPATEN BOGOR, PROVINSI JAWA BARAT Widyastuti, Sari
Abdurrokhim, Abdurrokhim
Sendjaja, Yoga Adriana
Administratively, Tanjungsari and its vicinity area lies within Bogor Subprovince, West Java – Indonesia. According to Java’s physiographic map by Van Bemmelen (1949), this area can be included as a part of the Bogor Zone. The goal of this research is to analysis samples of sandstone from Jatiluhur Formation and Cantayan Formation due to know the provenance of the formation. Sandstone from Jatiluhur Formation is Feldspathic Wacke and sandstone from Cantayan Formation is Lithic Arenite based on the sandstone classification by Pettijohn, 1975. According to the grain composition, the provenance of Jatiluhur Formation is the plutonic igneous rock, it shown by the quartz grain dominated by monocrystaline grain with non-undulatory extinction. Feldspar is dominated by Potassium Feldspar.  While the Cantayan Formation came from volcanic igneous rock, known by the abundance of igneous rock fragment with afanitic texture. The quartz grain is the less, consist of monocrystaline quartz with non – undulatory extinction. Based on the tectonic setting of the source rock, sandstone from Jatiluhur and Cantayan Formation came from the rock that part of Magmatic Arc area which the sediment source of Jatiluhur Formation is from Dissected Arc, while Cantayan Formation is from Transitional Arc – Undissected Arc area. Keyword:    Tanjungsari, Jatiluhur Formation, Cantayan Formation, sandstone, provenance. Secara administratif, daerah Tanjungsari dan sekitarnya termasuk kedalam wilayah Kabupaten Bogor, Propinsi Jawa Barat, dan terletak di dalam Zona Bogor menurut pembagian fisiografi oleh Van Bemmelen (1949). Tujuan penelitian ini yaitu melakukan analisis pada contoh batupasir Formasi Jatiluhur dan Formasi Cantayan guna mengetahui sumber sedimen pembentuk formasi tersebut. Batupasir Formasi Jatiluhur termasuk jenis Feldspathic Wacked dan batupasir Formasi Cantayan termasuk jenis Lithic Arenite berdasarkan klasifikasi batupasir oleh Pettijohn, 1975. Dari komposisi sedimen yang diamati, Formasi Jatiluhur berasal dari batuan beku plutonik ditunjukkan oleh butir kurasa yang didominasi oleh butiran monokristalin dengan sudut pemadaman lurus. Jumlah butir feldspar didominasi oleh K feldspar. Sedangkan batupasir Formasi Cantayan berasal dari batuan beku vulkanik, diketahui dari jumlah fragmen batuan yang sangat banyak berupa batuan beku bertekstur halus. Jumlah butir kuarsa ditemukan sangat sedikit berupa kuarsa monokristalin dengan sudut pemadaman lurus. Berdasarkan tatanan tektonik batuan sumber, batupasir Formasi Jatiluhur dan Formasi Cantayan  berasal dari batuan yang berada pada tatanan tektonik busur magma (Magmatic Arc) yang mana Formasi Jatiluhur bersumber dari area Dissected Arc, sedangkan Formasi Cantayan berasal dari area Transitional Arc – Undissected Arc. Kata kunci: Tanjungsari, Formasi Jatiluhur, Formasi Cantayan, batupasir, sumber sedimen.
2016-10-13 oai:ojs.jurnal.unpad.ic.id:article/9788 buka_link ↗ Highlight_link 10.24198/bsc.v14i1.9788
1672568 #5790 LANDSLIDE VULNERABILITY ZONE USING ANALYTICAL HIERARCHY PROCESS (AHP) METHOD IN BANYURESMI VILLAGE, SUKASARI DISTRICT, SUMEDANG, WEST JAVA Ryonaldo Rizqi, Muhammad Ibrahim
Iskandarsyah, T. Yan Waliana Muda
Athallah, Muhammad Nabiel Nahensa
Renardi, Raditya Ahmad
Ganjar Gani, Reza Mohammad
Landslides are a common natural disaster in Indonesia, especially in Banyuresmi Village, Sukasari District, Sumedang Regency, which is a research area covering 9.58 . This study aims to identify landslide vulnerability zones using the Analytical Hierarchy Process (AHP) method. This method is used in decision making by compiling a process hierarchy structure, a pairwise comparison matrix, class and subclass weighting analysis, and a consistency ratio (CR) test. The method was applied to evaluate and spatially overlay the controlling factors of landslide vulnerability, namely slope gradient, lithology, aspect (slope direction), land cover, and distance from streams. The results showed that the study area was predominantly classified as having moderate to high vulnerability, with the high vulnerability zone covering 60.94% of the area, the moderate vulnerability zone covering 38.38%, and the low vulnerability zone covering only 0.68%. Slope gradient was identified as the dominant factor, followed by lithology and aspect. Field validation confirmed a strong spatial correlation between the mapped high-risk zones and the actual locations of reported landslides, demonstrating the reliability of the method through field validation. Overall, this study provides a scientific basis and recommendations for land use planning, minimizing the risk of landslides, and mitigation strategies, especially in residential areas in Banyuresmi Village.Keywords: Analytical Hierarchy Process, Banyuresmi, Landslide, Sumedang, Slope
2026-04-30 oai:ojs.jurnal.unpad.ic.id:article/69895 buka_link ↗ Highlight_link 10.24198/bsc.v24i1.69895
1672569 #5790 Optimasi Lereng Highwall Tambang Batu Bara Terbuka Asam Asam Pit "X" Berdasarkan Mohr-Coulomb Failure Criterion Prajnanta, Aditya Bayu
Sihombing, Felix M.H.
Wusqa, Urwatul
Risyana, Teten
Bramantyo, Prima Laksana
Kestabilan lereng merupakan aspek yang perlu diperhatikan dalam tambang batubara terbuka Asam Asam untuk mencegah terjadinya kelongsoran. Kestabilan lereng dapat dipelajari menggunakan analisis kesetimbangan batas yang didasarkan dari teori Mohr–Coulomb Failure Criterion untuk mengetahui respons dari material batuan terhadap suatu gaya yang diberikan. Dari analisa tersebut tingkat kestabilan di lereng pertambangan dapat dikuantifikasi dengan mengukur nilai faktor keamanan (FK) dari sebuah lereng. Pada penelitian ini, penulis melakukan analisis kestabilan lereng pada tiga desain lereng highwall tambang batu Bara terbuka Asam Asam di Pit “X” yang dioperasikan oleh PT. Arutmin Indonesia, dengan bantuan perangkat lunak Geostudio SLOPE/W dan metode perhitungan nilai kesetimbangan batas Morgenstern–Price. Analisis pada ketiga lereng menunjukkan bahwa faktor keamanan dari desain lereng masih relatif tinggi dibanding standar perusahaan, sehingga penulis dapat memberi rekomendasi berupa optimasi desain. Optimasi desain lereng tambang bertujuan untuk mengurangi jumlah material yang tidak diinginkan namun masih memperhatikan nilai standar faktor keamanan dari tiap lereng. Penulis menemukan bahwa memungkinkan dilakukan optimasi dari ketiga lereng dengan mengurangi lebar bench tiap lereng dari 10 meter menjadi 7 meter, sehingga pengurangan lebar bench membuat sudut keseluruhan masing-masing lereng menjadi semakin tegak dengan kenaikan sudut sebesar 4o. Dengan dilakukannya optimasi, maka pihak perusahaan dapat mengurangi jumlah material yang tidak diinginkan dalam proses pengupasan, sehingga dapat mengurangi waktu dan biaya yang dibutuhkan dalam kegiatan ekstraksi batu bara.
2021-01-06 oai:ojs.jurnal.unpad.ic.id:article/29901 buka_link ↗ Highlight_link 10.24198/bsc.v18i3.29901
1672570 #5790 ANALISIS KIMIA BATUAN BASEMEN GRANITOID DI SUB CEKUNGAN JAMBI, SUMATRA SELATAN BERDASARKAN DATA DARI SUMUR JSB-3, JSB-4 DAN JSB-6 -, Euis Tintin Yuningsih
Research area located at Jambi sub basin, the northern part of South Sumatra Basin formed during Tertiary. The propose of the research is to determine petrological characteristics of pre-Tertiary basement rock based on major oxides analysis from the granitoid basement rock in research area with AAS method (Atomic Absorption Spectrophotometry) so the petrogenesis could be determined including kinds and characteristics of parent magma. Chemical rock analysis confirm the lithology of granitoid basement in Jambi sub basin are intermediate – acid magmas, calc-alkaline, medium – high K, metalluminous, subduction-related (orogen) at active continental margin. Granitoid at JSB-4 and JSB-6 shows magnetite series and I type. This Mesozoic granitoid probably as extension from the Thailand and Burma granite province, that underline the fact that there has been a history of subduction-related magmatism along Southwestern edge of Sundaland since earliest Mesozoic times.
granitoid, calc-alkaline, metalluminous, orogen, magnetite series, I-type 2016-04-14 oai:ojs.jurnal.unpad.ic.id:article/8120 buka_link ↗ Highlight_link 10.24198/bsc.v4i2.8120
1672571 #5790 LINGKUNGAN PENGENDAPAN SATUAN BATULEMPUNG SISIPAN BATUPASIR PADA FORMASI KEREK DAERAH JUWANGI DAN SEKITARNYA, BERDASARKAN KARAKTERISTIK LITOLOGI, ANALISIS STRUKTUR SEDIMEN, DAN KANDUNGAN FOSIL BENTONIK Morina, Hana
Syafri, Ildrem
Jurnaliah, Lia
The research area is located in the Juwangi, Grobogan District, Central Java Province. Geographically located between 110o 44’ 19,536” BT – 110o 49’ 19,5384” BT dan 7o 13’ 53,2704” LS – 7o 8’ 53,2716” LS. Research using the method geological surface mapping. Determination of depositional environment unit based on the characteristic of lithology, sedimentary structures, and benthic foraminiferal. Based on the characteristic of lithology, this unit composed of mudstone and sandstone. Mudstone has a consideralable thickness, as sandstones insert. Sedimentary structures that are found in the form of parallel lamination and cross lamination shows that its transport medium is water. Benthic foraminiferal analysis result indicate that the bathymetry zone is outer neritic. So it can be estimated that the depositional environment of this unit are in the shallow marine.
2014-12-02 oai:ojs.jurnal.unpad.ic.id:article/8375 buka_link ↗ Highlight_link 10.24198/bsc.v12i3.8375
1672572 #5790 OSTRACODA MIOSEN DARI FORMASI CIMANDIRI, SUKABUMI, JAWA BARAT FAUZIELLY, LILI
Winantris, .
Jurnaliah, Lia
Solihin, .
Fitriani, Ria
ABSTRAKLima belas spesies fosil ostracoda berumur Miosen dari Formasi Cimandiri telah dianalisis dari 6 conto sedimen yang berasal dari penampang stratigrafi lintasan S. Cimerang, Sukabumi. Analisis mikrofosil secara kuantitatif , memperlihatkan ostracoda Miosen tersebar pada litologi batulempung. Ostracoda yang melimpah pada lintasan ini adalah Hemicytheridea ornata, Cytherella hemipuncta, Hemicytheridea reticulata, Cytherelloidea excavata, Cyherella javaseanse, and Keijella carrirei.Berdasarkan kumpulan ostracoda, diketahui bahwa lingkungan pengendapan daerah penelitian adalah laut dangkal.Kata kunci: Ostracoda, Miosen, Cimandiri, Lingkungan Pengendapan, Batulempung.ABSTRACTFifteen species of fossil Ostracoda are describe from six sediment samples from Middle Miocene Cimandiri Formation, Sukabumi, West Java define from geological measure section profile Cimerang River. Microfossil Analysis based on quantitatively method, the distribution of Miocene Ostracoda be discovered in claystone lithology. Abundant ostracods are Hemicytheridea ornata, Cytherella hemipuncta, Hemicytheridea reticulata, Cytherelloidea excavata, Cyherella javaseanse, and Keijella carrirei. Based on the distribution of Ostracoda, it is known that the depositional environment of the study area is shallow sea.Keyword: Ostracoda, Miocene, Cimandiri, Depositional Environment, Claystone.
2019-08-13 oai:ojs.jurnal.unpad.ic.id:article/22735 buka_link ↗ Highlight_link 10.24198/bsc.v17i2.22735
1672573 #5790 STUDI BATUGAMPING BERDASARKAN KANDUNGAN FORAMINIFERA BESAR DI DAERAH CIRACAP, KABUPATEN SUKABUMI, PROVINSI JAWA BARAT, INDONESIA Silalahi, Natha Nuel
Pratiwi, Santi Dwi
Patonah, Aton
Daerah penelitian secara geografis terletak pada koordinat 106°28'0“ BT - 106°30′30” BT dan 7°18'30“ LS - 7°21′0” LS, Kecamatan Ciracap, Kabupaten Sukabumi, Provinsi Jawa Barat. Fokus penelitian ini adalah Batugamping Formasi Cibodas di daerah Ciracap dengan menggunakan analisis foraminifera bentonik besar dengan tujuan untuk menganalisis korelasi antara jenis batugamping dengan kelimpahan foraminifera besar. Metode penelitian yang digunakan adalah observasi lapangan, termasuk pengukuran penampang, dan analisis petrografi. Hasil dari penelitian ini menunjukkan bahwa terdapat dua litologi yang berbeda yang ditemukan pada Formasi Cibodas, yaitu Packstone dan Grainstone. Selain itu, dari hasil pengamatan petrografi, ditemukan 12 spesies foraminifera besar yang dapat diidentifikasi. Setelah dilakukan penarikan umur, didapatkan umur batugamping Formasi Cibodas berada pada kisaran Tf3-Th (Miosen Akhir-Pliosen Awal). Berdasarkan analisis data, dapat disimpulkan bahwa kelimpahan foraminifera secara signifikan lebih tinggi pada batugamping packstone dibandingkan dengan grainstone. Packstone terbentuk di lingkungan yang tenang dan berenergi rendah, dengan kandungan lumpur yang cukup banyak. Lumpur ini kaya akan nutrisi, sehingga mendukung kehidupan dan pelestarian foraminifera besar sedangkan grainstone terbentuk di lingkungan energi tinggi dengan arus dan gelombang kuat yang menghambat akumulasi lumpur serta kurang mendukung untuk pelestarian foraminifera bentonik besar. Lingkungan pengendapan berada di zona terumbu hingga dasar laut.Kata Kunci: Ciracap, Cibodas, Foraminifera Besar, Packstone, Grainstone, Terumbu
2025-04-30 oai:ojs.jurnal.unpad.ic.id:article/62890 buka_link ↗ Highlight_link 10.24198/bsc.v23i1.62890
1672574 #5790 STRUKTUR SESAR DI PULAU JAWA BAGIAN BARAT BERDASARKAN HASIL INTERPRETASI GEOLOGI -, Iyan Haryanto
There are four major fault lines pattern that developed in Tertiary sedimentary rocks in the Western Part of Java Island, that are the east-west, north-south, northwest-southeast and northeast-southwest. Fault structures with the east-west direction generally existed as a reverse fault and as the main fault patterns that control the distribution of rocks on the surface. Regionally, together with structural folds, these fault structures has formed the thrust fold belt structure. The other faults direction, generally known as the secondary faults that formed simultaneously with the thrust fold belt structure. These faulst are generally as strike slip fault or oblique faults that are transtensional or transpressional. This fault pattern is formed when a horizontal force strength differences in each segment. From the Compilation of the fold structures data, faults and the stratigraphy, it can be concluded that the geological structure developed in Tertiary sedimentary rocks in the western part of Java Island, began formed at late Tertiary, under the main compressional system, which is north-south trending.
thrust folds, oblique, transtensional, transpressional, compressional 2013-04-06 oai:ojs.jurnal.unpad.ic.id:article/8283 buka_link ↗ Highlight_link 10.24198/bsc.v11i1.8283
1672575 #5790 FASIES DAN LINGKUNGAN PENGENDAPAN BATUGAMPING FORMASI KALIPUCANG DAERAH KARANGNUNGGAL, TASIKMALAYA JAWA BARAT Kotarumalos, Sitti Hafsa
Abdurrokhim, .
Sendjaja, Yoga A.
Penelitian ini membahas fasies batugamping dan lingkungan pengendapan Formasi Kalipucang berumur Miosen Tengah, dan tersingkap di Karangnunggal, Tasikmalaya, Jawa Barat. Pengelompokkan fasies batugamping ini berdasarkan pada tekstur batuan dan komposisi skeletal (bioclast). Fasies batugamping Formasi Kalipucang dapat dikelompokkan menjadi 7 fasies, yaitu: (1) batugamping packstone berkomposisi dominan alga, (2) batugamping rudstone, (3) batugamping packstone berkomposisi dominan foraminifera, (4) batugamping wackestone – packstone berkomposisi foraminifera, (5) batugamping grainstone berkomposisi alga, (6) batugamping grainstone berkomposisi foramifera, dan (7) batugamping packstone berkomposisi coral. Batugamping Formasi Kalipucang ini diinterpretasikan diendapkan dalam lingkungan foreslope–deep shelf margin and barrier– shelf lagoon pada sebuah paparan yang terisolasi dari endapan volkanik.Kata kunci: batugamping, fasies, lingkungan pengendapan, Formasi Kalipucang, Tasikmalaya, Jawa Barat
2018-05-18 oai:ojs.jurnal.unpad.ic.id:article/16773 buka_link ↗ Highlight_link
1672576 #5790 TIPE ENDAPAN MINERAL PADA BATUAN METAMORF KUBAH BAYAH, BANTEN KHOLIS, NUR.
Patonah, Aton.
Barkah, Mochamad. Nursiyam
Penelitian ini dilakukan di daerah Kubah Bayah, Kecamatan Cihara, Kabupaten Lebak, Provinsi Banten, dengan tujuan untuk mengidentifikasi karakteristik, jenis, asosiasi mineral ubahan, mineral logam, dan tipe endapan mineral pada batuan induk berupa batuan metamorf. Petrografi dan mineragrafi adalah metode yang digunakan dalam penelitian ini. Berdasarkan hasil petrografi, didapatkan 6 jenis batuan metamorf, yaitu sekis klorit, sekis biotit klorit, sekis muskvoit klorit, sekis biotit muskovit klorit, sekis garnet biotit muskovit klorit, dan sekis aktinolit klorit sebagai batuan induk. Berdasarkan hasil identifikasi mineral ubahan dan asosiasinya, alterasi daerah penelitian dibagi ke dalam 2 zona mineral alterasi, yaitu zona epidot – klorit ± kuarsa yang termasuk ke dalam tipe alterasi propilitik dan zona serisit ± pirit yang termasuk ke dalam tipe alterasi filik. Selanjutnya, hasil mineragrafi, menunjukkan bahwa terdapat 2 asosiasi mineralisasi logam bijih, yaitu pos-metamorfik dan sin-metamorfik. Mineral penyusun asosiasi mineralisasi pos-metamorfik terdiri atas pirit, kalkopirit, sfalerit, bornit, kovelit, dan hematit, sedangkan mineral penyusun asosiasi mineralisasi sin-metamorfik terdiri atas pirit. Selain itu, juga teridentifikasi mineral logam berharga berupa emas pada asosiasi mineral pos-metamorfik. Berdasarkan karakteristik di atas, maka tipe endapan yang terbentuk di  daerah penelitian adalah didominasi oleh tipe endapan hidrotermal yaitu endapan epitermal sulfidasi menengah. Namun, sebagian kecil juga hadir, diduga sebagai endapan orogenik yang dicirikan oleh urat-urat paralel foliasi yang diisi oleh kuarsa sekunder, klorit sekunder, mineral lempung sekunder, dan mineral opak dan mineralisasi berupa mineral pirit yang terbentuk mengikuti foliasi pada mineral klorit.Kata kunci: Kubah Bayah, Zona alterasi – mineralisasi, batuan metamorf, epitermal sulfidasi menengah This research was conducted in the Bayah Dome area, Cihara District, Lebak Regency, Banten Province, with the aim of identifying the characteristics, types, associations of alteration minerals, metallic minerals, and types of metallic mineral deposits in metamorphic – hosted rocks. Petrography and mineragraphy are the methods used in this study. Based on the petrographic results, 6 types of metamorphic rocks were obtained, namely chlorite schist, chlorite biotite schist, chlorite muscovite schist, chlorite muscovite biotite schist, chlorite muscovite biotite garnet schist, and chlorite actinolite schist as the host rock. Based on the identification of alteration minerals and their associations, the alteration of the study area is divided into 2 zones of alteration minerals, namely the epidote - chlorite ± quartz alteration mineral zone which belongs to the propylitic alteration type and the sericite ± pyrite alteration mineral zone which belongs to the phyllic alteration type. Furthermore, mineragraphic results show that there are 2 ore metal mineralization associations, namely post-metamorphic and syn-metamorphic. The constituent minerals of the post-metamorphic mineralization association consist of pyrite, chalcopyrite, sphalerite, bornite, covellite and hematite, while the constituent minerals of the syn-metamorphic mineralization association consist of pyrite. In addition, valuable metal minerals in the form of gold were also identified in the post-metamorphic mineral association. Based on the above characteristics, the type of deposits formed in the study area is dominated by medium sulfidation epithermal deposits. However, a small part is also present, presumably as orogenic deposits characterized by foliation parallel veins filled with secondary quartz, secondary chlorite, secondary clay minerals, and opaque minerals and mineralization in the form of pyrite minerals formed following foliation on chlorite minerals.Keywords: Bayah Dome, Alteration-mineralization type, Metamorphic-hosted rock, Intermediate sulfide ephitermal
2024-04-26 oai:ojs.jurnal.unpad.ic.id:article/48948 buka_link ↗ Highlight_link 10.24198/bsc.v22i1.48948
1672577 #5790 ZONASI PALEONTOLOGI CEKUNGAN KUTAI BAGIAN BAWAH, DAERAH BALIKPAPAN DAN SEKITARNYA, PROVINSI KALIMANTAN TIMUR -, Yuyun Yuniardi
-, Rahmat Fakhrudin
-, Lia Jurnaliah
Fossil of Foraminifera, Nannoplankton, and Pollen were got into rock sample in lower Kutai Basyn and very interesting to do research. Paleontology zone were made for deliniation of rocks formation in lower Kutai Basyn. Paleontology zone divided into three part : Foraminifera zone, Pollen zone, and Nannoplankton zone.
Kutai Basyn, Fossil, Paleontology Zones 2010-08-06 oai:ojs.jurnal.unpad.ic.id:article/8250 buka_link ↗ Highlight_link 10.24198/bsc.v8i2.8250
1672578 #5790 TINJAUAN KETERDAPATAN BATUAN ULTRAMAFIK DALAM KOMPLEK OFIOLIT CILETUH DI DAERAH CILETUH, JAWA BARAT Hutabarat, Johanes
-, Ismawan
Ultramafic rock is defined as rock with a color index of more than 70, and most have good characteristics as igneous plutonic and metamorphic rocks. Ultramafic rocks in the area Ciletuh revealed in outcrops scattered as "pockets" (enclaves) in Ciletuh formation, with the tendency of azimuth northeast trending ± southwest, which gives the impression of intrusion body, or as blocks of exotic in Ciletuh Formation. Rock composed of peridotite and serpentinite of massive to foliated; associated with gabbro, basalt pillow structure. Association of peridotite-serpentinite with gabbro, basalt structure of the pillow, giving the impression that the rock may represent parts of the set ophiolite. Based on occurences in the field, where the body is suspected origin of ultramafic rocks in the ophiolite complex Ciletuh speculated a continuous sheet relicts oceanic crust that is emplaced above microcontinent. Part sheet becomes incomplete (dismembered) during emplacement, and then buried (burial) by next geological events (possible sedimentation process produces Formation Ciletuh) that largely hides covered by ofiolitic, and leaving only the ultramafic body which spread in most Ciletuh areas at West Java.
2015-12-02 oai:ojs.jurnal.unpad.ic.id:article/8408 buka_link ↗ Highlight_link 10.24198/bsc.v13i3.8408
1672579 #5790 JENIS LONGSORAN BERDASARKAN BIDANG DISKONTINUITAS PADA TAMBANG TERBUKA BATUBARA PT. PAMAPERSADA NUSANTARA DISTRIK ASMI, KALIMANTAN TENGAH Akbar, Faisal
Sophian, Raden Irvan
Muslim, Dicky
Manullang, Sahala
Kehadiran struktur geologi pada lereng tambang terbuka merupakan kerugian yang dapat menjadikan lereng tidak stabil atau rentan longsor. Analisis kinematik untuk lereng tambang terbuka merupakan salah satu aspek yang penting terhadap pengaruh struktur geologi dalam meminimalisir terjadinya tanah longsor. Tujuan dari penelitian ini yaitu untuk mengetahui potensi tipe longsoran pada lereng penelitian. Metode yang dilakukan yaitu dengan pengumpulan data sekunder, observasi lapangan, dan analisis kinematik. Hasil penelitian menunjukkan bahwa lereng daerah penelitian disusun oleh material batuan sedimen berupa batupasir, batulempung, batulanau, batulempung karbonan, dan batubara. Struktur geologi yang berkembang berupa kekar dan dua buah sesar normal yang berdekatan serta memiliki strike/dip 317°E/74° dan N 296°E/35°. Akibat dari perbedaan nilai strike/dip tersebut menyebabkan sesar normal saling berpotongan yang dapat menjadi penyebab longsoran. Dengan demikian, lereng daerah penelitian memiliki potensi tipe longsoran baji sehingga perlu dipertimbangkan dalam proses penambangan selanjutnya.Kata kunci : analisis kinematik, kestabilan Lereng, struktur geologi
2020-08-13 oai:ojs.jurnal.unpad.ic.id:article/27598 buka_link ↗ Highlight_link 10.24198/bsc.v18i2.27598
1672580 #5790 ANALISIS GEOMEKANIKA FORMASI HALANG DI DAERAH STRUKTUR GEOLOGI SEKITAR SUNGAI CITAAL, KUNINGAN, JAWA BARAT -, Zufialdi Zakaria
Lithology at research area consist of sandstone, claystone and brecia which include to Halang Formation. Structure of geology is sinistral strike-slip fault with relative strike to southwest - northeast. Geomechanic analysis given a number of Rock Mass Rating and Slope Mass rating as follows: Rock mass rating is 55 to 66. RMR to foundation is 48 to 50. Description of class number is 3 (III), its mean fair rock.Slope mass rating given number of slope angle which is suggested to stable slope, as follows: According to Laubscher (1975) SMR is 55o. According to Hall (1985) SMR is 56.20o to 63.35o. According to Orr (1992) SMR is 64.49o to 71.71o . Environmental management is preventive effort of impact which attend with foundation design according to allowable bearing capacity and / or choice the architecture of building to safety. Monitoring can be conducted to condition of building (house, bridge, drainage etc.)
Geomechanics, RMR, SMR 2006-01-02 oai:ojs.jurnal.unpad.ic.id:article/8110 buka_link ↗ Highlight_link 10.24198/bsc.v4i1.8110
Menampilkan 1.550.081 - 1.550.100 dari total 1.550.696 data